Radiator Quick Installation Guide
6
Tighten the
compression nut with
an adjustable wrench
unl snug. Aer the
radiator is lled and
heated, verify ALL
ngs are ght and
no water leaks.
9. 1/2” Copper Pipe Connecons - Bag F
Note: These instrucons show how to install supply / return piping from the oor. For alternate installaon
opons, see the full installaon manual. Bring rough piping up about 1 1/2” from the reducer ng on the
boom of the radiator.
Slide the large nickel
compression nut over
the pipe with the
open thread end
facing up.
Slide the copper split
compression ring over
the pipe with the
rubber poron facing
up. Unl it is fully
engaged with the
copper pipe.
Slide the pipe up unl
the rubber
compression ng
completely engages
with the reducer.
Slide the
compression nut up
the pipe and thread
it onto the reducer
by turning it
clockwise.
Slide the large nickel
compression nut over
the pipe with the
open thread end
facing up. Slide the
split compression ring
over the pipe.
8. 1/2” Pex Pipe Connecons - Bag E
Note: These instrucons show how to install supply / return piping from the oor. For alternate installaon
opons, see the full installaon manual. Bring rough piping up about 1 1/2” from the reducer ng on the
boom of the radiator.
Tighten the
compression nut
with an adjustable
wrench unl snug.
Aer radiator is lled
and heated, verify
ALL ngs are ght
and no water leaks.
Insert the barbed
compression ng
into the pipe unl
the shoulder rests on
the end of the pipe.
Slide the pipe up unl
the compression
ng completely
engages with the
reducer.
Slide the
compression nut up
the pipe and thread
it onto the reducer
by turning it
clockwise.