Radiator Quick Installation Guide

2
2. Install the Thermostac Valve - Bag A
The Thermostac valve is
installed in the top corner
of the radiator directly
above the supply / return.
Once this locaon is
veried, the
Thermostac Valve
can be inserted.
Hand ghten the
valve turning
clockwise unl ght.
Snug the valve using a
19mm (3/4”) wrench.
Do NOT overghten.
Hand ghten the air
vent turning
clockwise unl ght.
Snug the air vent using a
22mm (7/8”) wrench.
Do NOT overghten.
3. Install the Manual Air Vent - Bag B
The Manual Air Vent will
be installed in the top
corner opposite the
Thermostac Valve.
Turn the radiator around.
4. Install Reducers - Bag D and ghten end plugs
Flip the radiator over.
Remove the protecve
blue inserts. Insert the (2)
reducers into the boom
supply / return tapings.
Hand ghten the
reducers turning
clockwise unl ght.
Snug the reducers using
a 12mm (15/32”) allen
wrench.
Do NOT overghten.
Snug the chrome plugs in the
lower side tapings on each
end of the radiator using a
22mm (7/8”) wrench.
Do NOT overghten.