Radiator Quick Installation Guide

7
Slide the escutcheon plate
around the pipe with the at
side facing up and the edge
ridge facing down.
10. White Escutcheon Installaon - Bag G
Note: These instrucons show the supply pipe with escutcheon and rad snap already installed for reference.
The same process is used for both pipes.
Slide the pipe slot cover into
the channel in the escutcheon
plate unl it clicks into place.
11. Installaon of White Radsnap Pipe Covers
Note: Measure and cut the radsnap pipe covers to the correct length to t between the compression nut
and the escutcheon plate. This can be done carefully with scissors or with a sharp razor.
Spread the seam of the
radsnap and slide the opening
over the pipe.
If desired, the escutcheon can
be rotated so the slot cover
faces to toward the wall.
Once over the pipe, release
the ends and the radsnap will
automacally close to cover
the pipe.
Make Radsnap seam faces
toward the wall.