Installation Guide

General Informaon:
1. Unwrap the radiator
• Installaon in Closed Loop—Hot Water Systems Only.
• Max Operang Temperature: 250°F
• NOT for use in Steam Systems.
• The radiator may be mounted so the supply/return connecons can be on the boom right or boom le.
• All supplied ngs have an o-ring gasket seal. They do NOT require addional thread sealant or tape.
CAUTION: Only the supplied (or other Penso approved) ngs should be used to connect the radiator. Using any
other ngs / pipe connecons could result in water leaking and/or home damage. Penso is NOT liable for damages
caused by unapproved ngs and/or improper installaon of supplied ngs.
Penso Panel Radiator Package Contents:
Quick Installaon Guide
Refer to the installaon manual
for detailed instrucons.
• (1) Radiator
• Trim Package
 Bag A - (1) Thermostac Insert
 Bag B - (1) Air Vent
 Bag C - Wall Mounng Bracket Set
 Bag D - (2) Reducers
 Bag E - (2) 1/2” Pex Fings
 Bag F - (2) 1/2” Copper Fings
 Bag G - (2) White Escutcheons
 (2) White Radsnap Pipe Covers
Make note of the installaon locaon for the
thermostac insert and air vent
Carefully turn the radiator upside down so the top
grill is on the oor
Cut the plasc wrap across the boom side of the
radiator. This will minimize potenal damage.
Remove the plasc wrap and cardboard end caps
from the radiator. Turn the radiator right side up.
Note: Inspect the radiator for possible shipping damage
NOTE: For informaon or quesons outside
the scope of this manual contact a qualied
heang professional for assistance.