User's Manual

Wired Audio mode/aux line in Plug an
auxiliary audio cable, 3.5mm jack into the speaker Connect the other end of the jack
into your music device Then you can play music.
Safety Precautions and Procedures
Attention! Safety Operation Procedures: To avoid injury from
electric shock adhere to the following safety procedures:
◇ DO NOT touch the power plug with wet hands.Power outlet mustbe 110V AC.
◇ DO NOT pull on the power cord to disconnect from the outlet.Stress to the cord can result in pulling
the cord from the plug.
◇ DO NOT place transmitter or receiver around direct sunlight orany heat source such as electric/gas
stove or heaters of anykind.Do not place near an open flame.
◇ DO NOT place anything on top of the receiver or transmitter. Allow the unit to sit in an “openair”
environment with plenty ofroom around it. Unit can overheat when notinan“open air”environment.
◇ DO NOT take apart the transmitter orreceiver for any reason.this could cause electric shock.
please direct questions to customer support
Cellphone & Bluetooth devices Bluetooth speaker
NOT FOLLOWING SAFETY PROCEEDURES VOIDS ALL WARRANTIES!
Note: Don't use the bluetooth mode while using the wired audio mode
Volume adjustment from your music play or the bluetooth speaker
maybe necessary
Trouble Shooting
1. Can not find BT device with your bluetooth device when pairing.
Reaon 1: Bluetooth speaker battery could be low
Solution 1: Please charge the speaker
Reaon2: The speaker could not be powered or
Solution2: Please make sure the speaker is on
Reaon3: The speaker could be out of bluetooth range
Solution3: Please make sure the range is not beyond 10meters 30 feet)
2. Can not connect to BT device with your blue-tooth device
Reaon 1: bluetooth device could be paired with another device
Solution 1: Turn off the other connected device and pair again
Reaon2: bluetooth may need to be restarted
Solution2:Power the speaker off and on Connect devices and pair
Specifications
Description
Parameter
NO.
1
Frequency Response
20Hz-20KHz
2
Operating Voltage
AC120V/60Hz
3
S/N Ratio
95dB
4
Sensitivity
> 85dB
5
THD
0.3%@1KHz
6
Resolution
> 40dB
7
Sound Latency
<0.5ms
8
Working Temperature
-25ºC-85ºC