User's Manual

A4Schools SIA

2. The broadcast signal is the first input priority. When the broadcast signal is input, the other LED

lights are off, and meanwhile, the Bluetooth, 5.8GHz wireless and line-in cannot all can’t input;

Resume the current signal input when the broadcast signal stops for 3-5 seconds.

iv Pairing Mode between the Speaker and Microphone

Power the speaker up, and then press “OK” Key of the microphone for 3 seconds to initiate the

pairing process between the microphone and the speaker.

v Wireless Operation Instructions

When using the speaker for the first time, you need to perform a system installation.

Step1. Cable Connect

Install the power cable to the speaker.

Step 2: Turn on the wireless speaker

Flip the on/off switch to power the unit up.

Step 3: Turn on microphone &pairing automatically

Press OK key for 3 seconds to initiate the pairing process between the microphone and the

speaker.

Step 4: The volume of the system can be adjusted by Up& Down Arrow Key.

Step 5: Turn off the microphone and the speaker when not in use.

V Declaration

i. Intellectual property right statement: the hardware and software of the product are protected by

any copy of the product and of the specifications, parts or all, will bear the corresponding legal

responsibility. the brochures are copyright based on our company. Without the consent of our

company, a part or all of the manual should not be released.

ii. The manual is only for reference and the ultimate practical features are depending on the

products which ordered and received by users.

iii. All pictures illustrate only, and product as real assessment. If the product is upgraded or

changed, please forgive us will not further notice.