Operation Manual

Cerberus ADSL2+ Lite (P 6311-07)
38
•
••
• VLAN Group Setting
Based on each VLAN group, you can configure each group’s VLAN setting. You can
configure up to 8 VLAN settings. Remember to select Tagged option only if device on the
other side supports tagged packets, otherwise those packets will be dropped.
VLAN Index – Select PVID you wish to change.
Active – Select Yes to activate or No to deactivate selected PVID.
VLAN ID – Frames will be assigned VLAN ID displayed here.
ATM – Select VC, which will be assigned to this VLAN group (Port #) and select which
VC will sent tagged frames (Tagged).
Ethernet – Select Ethernet port, which will be assigned to this VLAN group.
VLAN Group Summary – List of all configured PVIDs.
When you are done making changes, click on SAVE to save your changes, DELETE to
delete the rule with the parameters you set or CANCEL to discard changes.