Operation Manual

Cerberus ADSL2+ Lite (P 6311-07)
47
Firmware
You can upgrade the firmware of the router and save/load configuration Romfile in this page.
During firmware upgrade process all router setting are reset to default values. Thanks to
Romfile it is possible to save router’s configuration to file and to load this file after upgrade
process. Make sure the firmware you want to use is on the local hard drive of the computer. It
might take several minutes, don’t power off it during upgrading. Device will restart after
the upgrade!! After a success upload, the system automatically restarts. Please wait for the
device to finish restarting. This should take about 2 minutes or more. You need to log in again
if you want to access the device.
Current Firmware Version – This filed displays the current firmware version.
New Firmware Location – Type in the location of the file you want to upload in this field or
click Browse… to find it.
New Romfile Location – Type in the location of the Romfile you want to upload in this field or
click Browse… to find it.
ROMFILE SAVE – Click this button to save router’s configuration to file.
Click UPGRADE to begin the firmware and/or Romfile upload process.
SysRestart
The SysRestart screen allows you to restart your router with either its current settings still in
place or the factory default settings.