Operation Manual

PENTAGRAM Cerberus [P 6367]
Connection Method [WISP or Wireless Router Mode]
In WISP or Wireless Router mode, there are five access modes: Dynamic IP (via DHCP), Static IP,
ADSL Virtual Dial-up (via PPPoE), L2TP and PPTP. The default mode is Dynamic IP. If your ISP
provides you the Dynamic IP access mode, please select Dynamic IP and click Next. If you are
provided the static IP access mode, please select Static IP and fill in the parameters provided by
your ISP or network administrator and then click Next. If you are provided the PPPoE access
mode, please input the user name and password provided by your ISP and click Next. In L2TP
and PPTP modes, you need to input the IP address, user name, and password.
Connection Method [3G Router Mode]
Select the Internet Service Provider (ISP) of your 3G modem card from the ISP list. If you don’t
find the 3G modem card you are using from the list, please select OTHER and input the correct
parameters, if you are not sure about them, please inquire the technicians of your ISP. For
parameters not provided by your ISP, just leave the corresponding fields blank.
17