Operation Manual

PENTAGRAM Cerberus [P 6367]
Wireless Basic Settings
Network Mode: Select one mode according to the using environment, and you are recommended
to use the 11b/g/n mixed mode.
SSID: SSID (Service Set Identifier) is the unique name of the wireless network. You can change
it to other names.
Broadcast SSID: Select Enable to enable the device's SSID to be visible by your wireless devices.
The default is enabled.
Channel: The wireless frequency used by wireless network. You are not recommended to use
the same channel that used by other SSIDs for using the same or neighboring channels would
cause mutual interference and reduce the router’s transmission rate.
Please refer to Basic Settings chapter on page 25 for other settings.
Wireless Security Settings
It is suggested that you choose WPA2-Personal for Security Mode and AES for WPA Algorithms,
you only need to input 8~63-bit Pass Phrase combined with numbers, letters and characters.
Click Next to save the configuration. More details please refer to the following section.
18