Operation Manual

PENTAGRAM Cerberus [P 6367]
WAN Settings [3G Router Mode]
Select the corresponding ISP to identify the 3G modem card and auto-match the 3G network
parameters, which makes it convenient for 3G network users. If you don’t find your ISP name in
the list, please select OTHER and input the parameters provided by your ISP.
Click System Status to view the connection status between current 3G WAN port and your ISP.
When it shows Connected, you can share the 3G network service.
Internet Connection Modes:
There are four Connection modes, please select one according to your needs:
• Connect Automatically: Connect automatically to the Internet after rebooting the system or
connection failure.
• Connect Manually: When the network is disconnected, users can connect it manually.
• Connect on Demand: Dial up automatically when there’s data transmission.
• Connect on Fixed Time: Connect to the Internet during the time you specified automatically.
NOTE: We recommend that you use the Connect on demand mode, in this mode the router
will disconnect the 3G modem card connection when the computer is turned off or
there’s no traffic being transferred, so even you forget to turn off the router, it won’t
waste the money in the UIM. For your convenience, the router will dial up
automatically when the computer needs to have access to the Internet. When there’s
no traffic, you need to log out all programs that can be connected to the external
network, such as, thunder, BT and so on.
20