Operation Manual

Cerberus P 6381-2
25
although you specify a time to Max Idle Time because some applications visit the
Internet continually in the background.
Connect Automatically - Connect automatically after the router is disconnected. To use
this option, click the radio button.
Connect Manually - You can configure the router to make it connect or disconnect
manually. After a specified period of inactivity (Max Idle Time), the router will disconnect
your Internet connection, and not be able to re-establish your connection automatically as
soon as you attempt to access the Internet again. To use this option, click the radio
button. If you want your Internet connection to remain active at all times, enter 0 in the
Max Idle Time field. Otherwise, enter the number in minutes that you wish to have the
Internet connecting last unless a new link requested. Note: Sometimes the connection
cannot be disconnected although you specify a time to Max Idle Time because some
applications visit the Internet continually in the background.
Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
Click the Save button to save this settings.
• L2TP
Select this WAN Connection Type, if your ISP provides L2TP connection.
User Name/Password – Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
Click the Connect button to connect immediately.
Click the Disconnect button to disconnect immediately.
Dynamic IP/ Static IP – Choose either as you are given by your ISP. When Static IP is
selected you can enter IP Address, Subnet Mask, Gateway and DNS in fields below.