Operation Manual

Cerberus P 6381-2
45
Add or Modify a MAC Address Filtering Entry
MAC Address - Enter the appropriate MAC address into this field. The format of the MAC
address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-
0B.
Description - Enter a simple description of the station in this field. For example: John’s PC.
Status - Select Enabled or Disabled for this entry on the Status pull-down list.
Click the Save button to save this settings.
Security / Remote Management
This feature allows you to manage your router from a remote location, via the Internet.
Web Management Port - Web browser access normally uses the standard HTTP service port
80. This router's default remote management web port number is 80. For greater security, you
can change the remote management web interface to a custom port by entering that number
in this box provided. Choose a number between 1024 and 65534, but do not use the number
of any common service port.
Remote Management IP Address - This is the current address you will use when accessing
your router from the Internet. The default IP address is 0.0.0.0. It means this function is
disabled. To enable this function, change the default IP address to another IP address as
desired.
To access the router, you need to enter your router's WAN IP Address into your browser's
address bar, followed by a colon and the custom port number. For example, if your router's
WAN address is 202.96.12.8 and you use port number 8080, enter http://202.96.12.8:8080 in
your browser. You will be asked for the router's password. After successfully entering the
password, you will be able to access the router's web-based utility.
Note: Be sure to change the router's default password to a very secured password.