Operation Manual

Cerberus P 6381-2
52
System Tools / Reboot
Reboot - Click this button to reboot the router.
Some settings of the router will take effect only after rebooting, which include:
• Change LAN IP Address. (system will reboot automatically).
• MAC Clone (system will reboot automatically).
• DHCP service function.
• Static address assignment of DHCP server.
• Change Web Service Port of the router.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router's settings to the factory defaults (system will reboot automatically).
System Tools / Password
It is strongly recommended that you change the factory default user name and password of
the router. All users who try to access the router's web-based utility will be prompted for the
router's user name and password.
Old User Name – Type old User Name in this field.
Old Password – Type old Password in this field.
New User Name – Type new User Name in this field.
New Password – Type new Password in this field.
Confirm New Password – Retype new Password in this field.
Click the Save button to save this settings.
Click the Clear All button to clear all fields.
Note: The new user name and password must not exceed 14 characters in length and must
not include any spaces. Enter the new Password twice to confirm it.