Operation Manual
Table Of Contents
- INDEX
- Introduction
- Tablet components
- Installing the tablet
- Configuring the tablet
- Additional Information
- Einleitung
- Bestandteile des Tabletts
- Vorbereitung des Tabletts zum Einsatz
- Tablett installieren
- Tablett konfigurieren
- Zusätzliche Informationen
- Wstęp
- Elementy tabletu
- Przygotowanie tabletu do pracy
- Instalacja Tabletu
- Konfiguracja tabletu
- Informacje dodatkowe
PENTAGRAM O’Pen XL/XXL
EN - 3
Setting up the tablet
Power supply
The tablet requires power for the mouse and pen in order to operate correctly. Two 1.5V AAA
batteries are used. Insert one battery in the battery compartment at the bottom of the mouse.
Insert the other in the tablet pen after prior unscrewing the back of the pen (as when replacing
a pen cartridge).
Connecting the tablet to the PC
The tablet is connected to an available USB connector, which is located on the PC’s back
panel. The tablet is powered using the USB port. The entire set is connected using a single
cable.
Installing the tablet
Windows 98/Me users
1. Do not connect the tablet to the PC.
2. Launch Windows and place the software CD in the CD-ROM drive.
3. The setup wizard will be launched automatically. If the CD-ROM autorun feature is
disabled, run Setup.exe in the CD’s root directory.
4. Click O’Pen XL or O’Pen XXL.