Operation Manual

PENTAGRAM horNet Wi-Fi PCI [P 6121-L7]
ID \ PASSWORD tab
EAP Method – Change the EAP authentication method.
Tunnel Authentication – Change the tunnel authentication.
Session Resumption – Enable/disable session resumption.
Authentication ID / Password – Data for connection authentication:
• Identity – Enter the Identity for server.
• Password – Enter the Password for server.
• Domain Name – Enter the Domain Name for server.
Password Mode – Select the token verification method. Password mode change is only possible
for Generic Token Card tunnel authenticating:
• Soft Token – At each connection trial, a token will be generated to authenticate the station
on the authentication server
• Static Password – A static password to be entered in the Password field above.
OK – Save the settings and close the profile configuration.
Cancel – Close the profile configuration without saving the settings.
Client Certification tab
Use Client certificate – Select this option to use the client certificate, then select it from the list.
Below, certification information will be displayed:
• Issued To – To whom the certificate has been issued.
• Issued By – By whom the certificate has been issued.
• Expired On – Certificate expiration date.
• Friendly Name – Certificate friendly name.
OK – Save the settings and close the profile configuration.
Cancel – Close the profile configuration without saving the settings.
17