Operation Manual

PENTAGRAM horNet Wi-Fi PCI [P 6121-L7]
Advanced tab
On this tab you can find network adapter advanced settings.
Wireless mode – Select the wireless mode in which the adapter will operate.
Select Your Country Region Code – The available operating channels (frequencies) depend on
the item selected here. Using the frequency of another country/region can violate the law. In
some cases, the driver will determine this field's value on the basis of the operating system
regional settings – in this case it is impossible to change its value.
Enable TX BURST – Enable or disable the frame burst mode. This mode may not be compatible
with all network devices.
Enable TCP Window Size – Enabling this function may improve the TCP performance in a
wireless connection.
Fast Roaming at ... dBm – Switching between the network access points will occur after
exceeding the minimum strength signal of the current access point set in this field.
Show Authentication Status Dialog – Select this option to display information about
authentication process when connecting to an access point using 802.1x protocol.
Apply – Apply the changes.
25