Operation Manual

horNET P 6121-L3 / P 6122-11
Advanced Statistics window
Transmit: Shows information regarding outbound data:
• Frames Transmitted OK: Shows the number of frames transmitted without errors.
• Frames Retried: Shows the number of frames transmitted again.
• Frames Dropped: Shows the number of frames dropped.
• No ACK: Shows the number of frames transmitted without acknowledgement.
• ACK Frames: Shows the number of frames transmitted with acknowledgement.
• RTS Frames: Shows the number of RTS (Request To Send) frames.
• CTS Frames: Shows the number of CTS (Clear To Send) frames sent in response to
RTS frames.
• No CTS Frames: Shows the number of frames without CTS reply.
• Retried RTS Frames: Shows the number of RTS frames transmitted again.
• Retried Data Frames: Shows the number of data frames transmitted again.
Receive: Shows information regarding inbound data.
Beacons Received: Shows the number of beacon frames received (to support the
connection).
Frames Received OK: Shows the number of frames received without errors.
Frames Received with Errors: Shows the number of frames received with errors.
CRC Errors: Shows the number of CRC (checksum) errors.
Encryption Errors: Shows the number of encryption errors.
Duplicate Frames: Shows the number of duplicated frames.
AP Mismatches: Shows the number of mismatches related to access points.
Data Rate Mismatches: Shows the number of mismatches related to data rate.
Authentication Time-Out: Shows the number of authentication attempts timed out.
Authentication Rejects: Shows the number of authentication attempts rejected.
Association Time-Out: Shows the number of connection attempts timed out.
Association Rejects: Shows the number of connection attempts rejected.
Standard MIC OK: Shows the number of correct standard MIC (Message Integrity Code)
values.
Standard MIC Errors: Shows the number of incorrect standard MIC (Message Integrity Code)
values.
CKIP MIC OK: Shows the number of correct MIC (Message Integrity Code) values used by
CKIP (Cisco Temporal Key Integrity Protocol).
CKIP MIC Errors: Shows the number of incorrect MIC (Message Integrity Code) values used
by CKIP (Cisco Temporal Key Integrity Protocol).