Operation Manual

horNET P6121-L4 / P6122-12

Advanced Tab

This Tab can be used to change advanced wireless network adapter options.

Wireless mode – Select wireless stations to which the adapter can connect: 802.11 B/G mix

(802.11b and 802.11g stations) or 802.11 B only (802.11b stations only).

Wireless Protection – AUTO (STA will dynamically change as AP announcement), ON

(Always send frame with protection) or OFF (Always send frame without protection).

TxRate – Allows the transmit rate to be changed manually. Default value: Auto.

Enable TX BURST – Selecting this mode may accelerate frame transmission.

Enable TCP Window Size – Selecting this feature may improve TCP performance on

wireless connections.

Fast Roaming – Switchover between access points will occur when the current access point’s

minimum signal strength threshold set in this field is exceeded.

Show Authentication Status Dialog – When you connect AP with authentication, choose

whether show Authentication Status Dialog or not. Authentication Status Dialog displays the

process about 802.1x authentication.

Select Your Country Region Code – The item selected in this field determines the channels

(frequencies) available.

Enable CCX (Cisco Compatible eXtensions) – This enables support for Cisco Compatible

Extensions.:

• Turn on CCKM – Using LEAP allows taking advantage of CCKM (Cisco Centralized Key

Management).

• Enable Radio Measurement – Enables support for the Radio Measurement feature

used in Cisco network hardware.

Apply – Applies changes.