Operation Manual

PENTAGRAM horNET P 6121-L5 / P 6132-07 / P 6133-10

• 802.11n Tab

Detailed information about APs support of 802.11n protocol and its functions. FALSE

value means function is not supported or disabled, TRUE – supported and enabled.

Advanced Tab

This Tab can be used to change advanced wireless network adapter options.

Wireless mode – Select wireless mode in which adapter will work.

Enable TX BURST – Selecting this mode may accelerate frame transmission.

Enable TCP Window Size – Selecting this feature may improve TCP performance on

wireless connections.

Fast Roaming – Switchover between access points will occur when the current access point’s

minimum signal strength threshold set in this field is exceeded.

Show Authentication Status Dialog – When you connect AP with authentication, choose

whether show Authentication Status Dialog or not. Authentication Status Dialog displays the

process about 802.1x authentication.

Select Your Country Region Code – The item selected in this field determines the channels

(frequencies) available. In some cases driver will select region based on regional settings of

operating system – in those cases it’s not possible to change this value.

Enable CCX (Cisco Compatible eXtensions) – This enables support for Cisco Compatible

Extensions.:

• Turn on CCKM – Using LEAP allows taking advantage of CCKM (Cisco Centralized Key

Management).

• Enable Radio Measurement – Enables support for the Radio Measurement feature

used in Cisco network hardware.

Apply – Applies changes.