User Manual PENTAGRAM USB VoIP Phone (P 1411, P 1412) For the latest versions of manuals, drivers and software, visit www.pentagram.eu.
NOTE: All information and technical specifications provided in this manual are subject to change without notice and/or indication. © 2007 PENTAGRAM All rights reserved. Unauthorized duplication and copying prohibited.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) INDEX INTRODUCTION ...................................................................................................... 5 FEATURES.......................................................................................................... 5 PACKAGE CONTENTS ....................................................................................... 5 REQUIREMENTS ................................................................................................
PENTAGRAM USB VoIP Phone (P 1411, P 1412) 4
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Introduction PENTAGRAM USB Phone (P 1411, P 1412) is a high quality USB hand phone with 8polyphonic ring tones. Its fashionable appearance, easy-to-use design and euphonious melody will set you apart from others. Just plug it into your PC or laptop, and then you can TM enjoy the full features of Skype . Features • • • • • • • • • Classical 8-polyphonic ring tones catering to different tastes. Rings loudly on an incoming call.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Overview 6 7 1 8 2 9 3 10 4 11 5 1. 2. 3. 4. 5. 6. 7. Volume Control – This set of button is designed for volume level adjustment. The top button is for volume up; the bottom button is for volume down. Accept/Dial: • When you receive a call, press this button to answer the call. • When you have selected your contact or input the desired phone number, press this button, to place your call.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Mute – Press this button during a conversation to disable the microphone temporarily so the person on the other end cannot listen in. Press the button again to enable the microphone and back to the conversation mode. 9. End/Cancel: • After your conversation is over, press this button to end the call. • When you dial the wrong number, press this button to clear the number. • Press and hold this button for approximately 2 seconds to hide Skype window. 10.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Installation Note: Do not connect the USB Phone to your PC before installing drivers! 1. 2. Insert the supplied CD into your CD-ROM drive. The setup wizard should launch automatically. Under Windows Vista, you may also need to click Run PENTAGRAM.EXE when the AutoPlay dialog box appears. If the program does not start automatically, click Start and then select Run (In Windows Vista: Start > All Programs > Applications > Run).
4. PENTAGRAM USB VoIP Phone (P 1411, P 1412) Select the installation folder and click Next >. 5. Select the Start Menu folder and click Next >. 6. To begin the installation process press Install button.
7. PENTAGRAM USB VoIP Phone (P 1411, P 1412) Click Finish to complete installation. 8. Connect USB Phone to PC. USB Phone Configuration System Tray Icon A configuration application (Console) is installed with phone drivers. The application’s icon is displayed in the system tray (next to the clock), and its appearance depends on USB Phone and Skype application status. (red circle) The USB Phone is not connected to the PC. (yellow circle) Skype is not running.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Audio Settings tab This tab allows you to set up I/O Audio devices for Windows and Skype. Volume Settings Audio Out – Select volume of the phone speaker. Sound Device for Skype Audio Out – Select device, which will be used in Skype as a speaker. Audio In – Select device, which will be used in Skype as a microphone. Ringer – Select device, which will be used in Skype as a ringer speaker.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Phone Settings tab Ringer – Select audio file, which will be used as a ringer (only if your soundcard is selected as the audio device for Ringer in Audio Settings tab) Mic Mute – Enables (On) or disables (Off) microphone muting. Function Key tab This tab allows you to set up Function Keys. You can assign to each button one of following function: Change Status, Contacts List, Redial, Start Chat, Ringer and Hold.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Language tab Select language you wish to use in Console. Ringer Settings tab This tab allows you to set up ringer and key press sounds. Incoming Call – Select whether ringer will be audible in Speaker, Buzzer or None. Key Press – Select whether key press sounds will be audible in Speaker, Buzzer or None. Ringing – Select ringer you wish to use.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Information tab On this tab you will find all information about Phone and Console. Information Console Version – Version of Console application. Firmware Version – Version of firmware software. AutoRun AutoRun Console With Windows Startup – Select this option if you want to automatically start Console application each time Windows starts.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Using USB Phone PENTAGRAM USB Phone is designed especially for Skype application. However it can be used with any Instant Messaging application that supports voice. Just set (in applications configuration) USB Phone (SKYPE PHONE) as device for Audio In (Microphone) and Audio Out (Speakers/Headphones). During first run of Skype after driver installation following window will appear. Select Allow this program to use Skype and click OK.
PENTAGRAM USB VoIP Phone (P 1411, P 1412) Troubleshooting What shall I do when the other party cannot hear me when I call him/her with USB phone? • • Please go to USB Phone Console and ensure Audio In is set to SKYPE PHONE under Sound Device for Skype in Audio Settings tab. Ensure the Mic Mute box (Phone Settings tab) is not checked. No sound can be delivered through external speakers after I plug in USB Phone to the computer. • Please open USB Phone Console, select Sound Devices tab.
