Operation Manual

PENTAGRAM USB VoIP Phone (P 1411, P 1412)
6
Overview
1
2
3
4
5
6
7
8
9
10
11
1. Volume Control – This set of button is designed for volume level adjustment. The top
button is for volume up; the bottom button is for volume down.
2. Accept/Dial:
• When you receive a call, press this button to answer the call.
• When you have selected your contact or input the desired phone number, press this
button, to place your call.
3. Buddy Seesaw:
• Flip it up and down to toggle through your contacts in Skype contact list.
• In other tab menus, you can flip it to toggle through the selections.
4. Skype:
• Press this button to make Skype window active.
• Press this button again to toggle through the tab pages (Contacts, Dial, Call List) of
Skype.
5. + button (SkypeOut button) – Use this button to dial to telephone or cellular phone.
Press + button, then enter country code, area code, and phone number. (Require
SkypeOut credits)
6. Status LED mode – When phone is connected to your computer, the LED will be lit
during standby;
7. Function Keys – There are three function keys, which is preset for Change Status,
Contacts List, and Ringer. You may customize the three function keys to your desired
functions, such as Change Status, Contacts List, Redial, Start Chat, Ringer or Hold.
You must open USB Phone Console to customize the three buttons.