Operation Manual

PENTAGRAM USB VoIP Phone (P 1411, P 1412)

Installation

Note: Do not connect the USB Phone to your PC before installing drivers!

1. Insert the supplied CD into your CD-ROM drive. The setup wizard should launch

automatically. Under Windows Vista, you may also need to click Run PENTAGRAM.EXE

when the AutoPlay dialog box appears. If the program does not start automatically, click

Start and then select Run (In Windows Vista: Start > All Programs > Applications >

Run). In the box that appears, type X:\PENTAGRAM.exe (where X is the letter assigned

to your CD-ROM drive).

2. Select installation to run the installer.

3. Click Next > to begin installation.