User's Manual

40
EasyTouch Wireless Control Panel User’s and Installation Guide
Diagnostics Menu: Air Temp
Displays the current outside air temperature.
Menu/Select: Press this button to return to the Settings menu options. Press the
button again to return to the main menu options or press again to return to the Main
screen.
Diagnostics Menu: Disp Codes
Perform a communications test with installed equipment. Use this feature when testing the system.
To start test:
Down button: Select Ye s to enable the feature.
Menu/Select or Right button: Press either of these buttons to start
communications test. Digits display on the right side of all menu screens indicating
verification transmit and received packets.
To stop test: Go to the “Disp Op Codes” menu and select No, then press the
Menu/Select button to exit.
Diagnostics Menu: Cir Names: [Off/On]
This feature is useful if you have renamed many circuits and want to view the original factory default circuit
names.
To enable:
Right button: Select On to view the factory default circuit names.
Menu/Select: Press this button to exit.
To disable:
Right button: Select Off to disable the feature.
Menu/Select: Press this button to exit.
Diagnostics Menu: Reset System
Reset the EasyTouch wireless control panel. Resetting the wireless control panel will not effect the stored
system configuration settings.
Right button: Press the Right button to reset system. The main screen will be
displayed and communication will be established with the EasyTouch outdoor control
panel at the pool equipment pad.
▼ DIAGNOSTICS ▼ AIR TEMP
Getting There
T
Air Temperature
72° F
S
T
Disp Op Codes
Display? No
S
T
Solar Temp
Air Temp
Disp codes
Cir Names [Off]
S
X
▼ DIAGNOSTICS ▼ CIR NAMES
Getting There
[Off]
▼ DIAGNOSTICS ▼ DISP CODES
Getting There
T
S
X
Air Temp
Disp codes
Cir Names [Off]
Reset System
▼ DIAGNOSTICS ▼ RESET SYSTEM
Getting There