User's Manual
IntelliCenter Control System Wireless Control Panel Installation Guide
IntellliCenter Control System Wireless Control Panel Installation Guide
11
Wireless Control Panel Firmware Update
The IntelliCenter Control System Wireless Control Panel current firmware can be updated using the
USB port.
Updating the Current Wireless Control Panel Firmware
1. From the Home screen on the Wireless Control Panel. Tap Settings > Advanced System
Configuration > System to access the System screen.
2. Tap Firmware Update to open the Firmware Update screen, then tap Update From USB.
System Diagnosc Informaon
Detected Hardware
System
Version: 1.0
Firmware Update
Firmware Update
Current Firmware: v.1.0
firmware to a newer or earlier version.
Update from Ethernet
Update from USB
Update from Panel
Firmware Update: Tap this button to display the update option.
Displays the current IntelliCenter Control System firmware version. Follow the screen prompts
once firmware update has started.
Update from USB: Tap this button to update the current firmware to a newer or earlier version
from a USB memory device installed in the Outdoor Control Panel, Indoor Control Panel, Wire-
less Remote or PC computer.
2. With the Wireless Control Panel in the cradle: Insert the USB device into the Wireless Control
Panel cradle. The USB device will be detected. The latest firmware will be copied onto the Wireless
Control Panel. To view the firmware version, from the Home screen, tap Settings > Advanced
System Configuration > System to view the Firmware version displayed on the System
Information button.