User Manual

11
INTELLIFLO
®
Variable Speed Pump Installation and User’s GuideINTELLIFLO
®
Variable Speed Pump Installation and User’s Guide
Pump Menu: Speeds 1-8
SPEED 1-8
Speed 1 (1-4)
Manual
Schedule
Egg Timer
Set Speed - Default: MANUAL
Set Speed
Set Start Time
Set Stop Time
Set Speed
Time
Speed 5 (5-8)
Schedule
Set Speed
Set Start Time
Set Stop Time
Disabled
Default: Disabled
MENU
Pump Operating Modes
The IntelliFlo
®
Variable Speed Pump can be
programmed in three different modes:
Manual, Schedule, and Egg Timer. Speeds 1-4 can
be programmed in all three modes. Speeds 5-8 can
only be programmed in Schedule mode since there are
no buttons on the control panel for Speeds 5-8. The
default setting for Speeds 5-8 is “Disabled”.
Set Speeds in Manual or Egg Timer Mode
(Speeds 1-4 Only)
1. Press Menu.
2. Use Up or Down arrows to scroll to “Speed 1-8”,
then press Select.
3. Use Up or Down arrows to find the speed (1-4) you
wish to program.
4. Press Select. Speeds 1-4 default setting is
Manual. To set a speed in Manual mode, press the
Down arrow (“Set Speed” will display) and press
Select to change. Use the Up or Down arrow to
adjust speed.
5. Press Enter to save the new speed setting.
Continue below to Step 6 to set a speed in Egg
Timer mode.
6. Press Select and scroll to “Egg Timer”.
Press Enter.
7. Press the Down arrow to display “Time”.
8. Press Select and use arrow keys to adjust time.
9. Press Enter to save the new time setting.
10. Press Escape to exit.
Speed 1 (1-4)
Manual
Schedule
Egg Timer
Set Speed - Default: MANUAL
Set Speed
Set Start Time
Set Stop Time
Set Speed
Time
Speed 5 (5-8)
Schedule
Set Speed
Set Start Time
Set Stop Time
Disabled
Default: Disabled
12:15p
Egg Timer
Time
12:15p
Manual
Set Speed
Manual Mode Menu Screen
Egg Timer Menu Screen
Manual
Assigns a speed to one of the four Speed buttons
on the control panel. This mode can only be used for
speeds 1-4.
To operate in Manual mode, press one of the four
speed buttons and then press the Start/Stop button.
The pump will run the assigned speed for that speed
button.
Egg Timer
Speeds 1-4 can be programmed to run for a duration
of time once a speed button is pressed.
To operate in Egg Timer mode, press a speed
button and then press Start/Stop. The pump will run
that speed for the set amount of time and then turn off.
Schedule
Program speeds 1-8 start and stop at a specific time
during a 24 hour period. Speeds programmed in
Schedule mode will override any manually selected
speed (speeds set by manually pressing any of the
speed buttons on the control panel).
Speed Menu Tree Options