User Manual

1
INTELLIFLO
®
Variable Speed Pump Installation and User’s GuideINTELLIFLO
®
Variable Speed Pump Installation and User’s Guide
PUMP OVERVIEW
The IntelliFlo
®
Variable Speed Pump can be
programmed to run at specific speeds and time
intervals for maximum operating efficiency and energy
conservation for a variety of inground pools.
External Control
IntelliTouch
®
, EasyTouch
®
, SunTouch
®
Control Systems
and IntelliComm
®
Communication Centers can remotely
control the IntelliFlo pump. The pump’s communications
address and other functions are accessible from the
pump’s control panel.
• The pump can operate from 450 RPM to 3450 RPM
with four preset speeds of 750, 1500, 2350 and 3110
RPM
• The pump can be adjusted from the control panel to
run at any speed between 450 RPM to 3450 RPM
for different applications
• Up to 8 programmable speeds
• Pump control panel alarm LED and error messages
warn the user against under and over voltage, high
temperature, over current and freeze protection
• Communicates with EasyTouch, IntelliTouch or
SunTouch control systems or an IntelliComm
communication center via a two-wire RS-485
cable connection
• Self-priming for easy start-up
• Compatible with most cleaning systems, filters, and
jet action spas
• UL/CUL/NSF
Drive Assembly and Control Panel
The IntelliFlo pump drive assembly consists of an
operator control panel and the system electronics that
drive the motor. The drive microprocessor controls
the motor by changing the frequency of the current it
receives together, with changing the voltage to control
the rotational speed.
Motor Features
• Permanent Magnet Synchronous Motor (PMSM)
• High efficiency (3450 RPM 92% and 1000 RPM
90%)
• Superior speed control
• Operates at lower temperatures due to high
efficiency
• Same technology as deployed in hybrid electric
vehicles
• Designed to withstand outdoor environment
• Totally enclosed fan cooled
• Three-phase motor
• 56 Square Flange
• Six-Pole
• Low noise
• RS-485 commincation cable included
• IntelliTouch systems control 8 IntelliFlo pumps using
8 speeds per pump.
• EasyTouch systems control 2 IntelliFlo pumps using
8 speeds per pump.
• SunTouch systems control one IntelliFlo pump using
8 speeds.
• IntelliComm systems control one IntelliFlo pump
using the 4 External Control programs.
IntelliFlo Variable Speed Drive Assembly
Motor Stand
Operator Control Panel,
Buttons and LED
AC Power Connection
Compartment
Communication port for connection to
EasyTouch, IntelliTouch or SunTouch
system or IntelliComm communication
center via two-wire RS-485 cable
(not shown)