User Guide

PROWLER® 920 and WARRIOR® SE Robotic Inground Pool Cleaner Installation and User’s Guide
1
Overview
Prowler
®
920 and Warrior
®
SE Robotic Pool Cleaners are designed to scrub, vacuum, and filter (including the
waterline) your inground pool. Before operating this product, be sure to read and follow all warning and safety
instructions on pages ii-iii.
Cleaner Components:
• Cleaner and 60 ft. Communication Cable with Swivel
• Power Supply
Cleaner Features:
• Weekly Timer
• Wall and Waterline Scrubbing
• Top Loading Basket Filtration
PREPARATION OF THE POOL AND CLEANER
Cleaner and 60 Ft.
Communication Cable w/ Swivel
Power Supply
STEP 1:
Power Supply Placement
Position the power supply at least 12 feet (3.5 m) from the
edge of the pool. See Figure 1.
STEP 2:
Unroll Cleaner Cable
Unroll the cable and stretch it out completely so that is has
no kinks. See Figure 2.
Initial Setup
Before using the cleaner for the first time, perform the following procedures:
Figure 2
3.5 m / 12 ft
Figure 1
STEP 3:
Connect Power Supply to Cleaner
Connect the communication cable to the power supply.
Ensure the connector notch is lined up with the
corresponding groove in the socket on the power supply.
Turn the cable connector clockwise to lock the cable into
the power supply connection. See Figure 3.
Figure 3