User Guide

PROWLER® 920 and WARRIOR® SE Robotic Inground Pool Cleaner Installation and User’s Guide
5
Cleaning the Filter Basket
Note: It is highly recommended that you clean the filter basket after each cleaning cycle. Too much debris in the filter will
restrict the suction power of the Prowler
®
920 or Warrior
®
SE Robotic Pool Cleaner and reduce its effectiveness.
To clean the filter basket, follow the instructions given below:
Figure 11
STEP 1:
Open the Filter Cover
When the filter cover is opened the filter basket handle will
pop up independently. See Figure 12.
Figure 13
STEP 2:
Lift the basket out of the cleaner body.
Figure 12
1
2
Figure 14
STEP 3:
Empty the Filter Basket
Open the latch at the bottom of the filter basket. This will
release the bottom lid of the basket and dump much of the
collected debris. See Figure 14.
Figure 15
STEP 4:
Clean the Filter Basket
Thoroughly clean the filter basket with a garden hose.
See Figure 15.