User Manual

INTELLIBRITE

5G Pool Light Installation and User’s Guide

5. Install the IntelliBrite

Light assembly into the niche and tighten the special

bronze pilot screw.

Use only the special pilot screw provided with this

underwater light. This screw mounts and electrically grounds the housing

securely to the mounting ring and wet niche. Failure to use the screw

provided could create an electrical hazard which could result in death or

serious injury to pool users, installers or others due to electrical shock.

6. Fill the pool until the underwater light is completely submerged in water

before operating the light.

7. Final check for proper light operation: To check for proper operation,

switch on the main switch or circuit breaker, and the switch that operates the

IntelliBrite underwater light itself. The light should illuminate when power is

applied. If not recheck the installation steps starting with Step 1 (page 7)

FOR INTELLIBRITE POOL LIGHT REMOVAL

AND INSTALLATION INSTRUCTIONS SEE:

• Replacing the IntelliBrite

5G Pool Light Assembly

instructions, on page 3.

Pilot screw (bronze)

IntelliBrite 5G Pool Light