Installation Guide

3
Installation
Drawings
CAUTION: Do not pump
flam ma ble liquids, strong
chemi cals or salt water.
10. In applications where the
pump may sit idle for months
at a time, it is recommended
that the pump(s) be cycled
every few months to ensure
the pumping system is working
properly when needed.
11. An audible alarm, such as
the should be installed for
additional protection against
high water conditions.
Your pump warranty is void if...
• power cord has been cut.
• pump has been used to
pump mud, cement, tar,
abrasives or chem i cals.
• pump has been used
for pumping of hot water
(above 120° F).
•
pump has been
dismantled by other than
authorized service center or
distributor.
W-A1
D-A1
V-A1