User Manual

TABLE OF THE DIFFERENT STATES OF THE DISPLAY
Display Meaning Verication Action required
St-by
Standby
FLO
No/insucient water ow
–Check the water ow in the device.
–Check the clogging of the lter.
–Check the bypass setting.
–Check the direction of the passage of water
in the device (inlet bottom, outlet top).
Contact your distributor.
AL10 / AL11
HP error
AL15 / AL16
Excessive temperature difference
between water outlet/inlet
AL18
Excessive temperature at the compres-
sor outlet
AL17
Protection temperature
too low in cooling
SAL7 / AL8
Communication error.
Check the connections between the display
and the electronic card in the device.
AL3
Sensor error (water inlet)
Check that the sensor in question is correctly
connected.
AL4
Sensor error (water outlet)
AL5
Sensor error (evaporator)
AL1
Sensor error (compressor outlet)
AL2
Sensor error (compressor inlet)
AL6
Sensor error (ambient)
AL9
Fan error Check the fan connections.
AL14
Temperature too low The outdoor temperature is < 0°C.
Wait for the temperature to
rise.
AL19 / AL20
Power supply issue
Have the installation checked by a qualied
technician.
Contact your distributor.
AL21 / AL22
AL23 / AL24
AL25
Electronic/overheating problem.
Power down the device for 5 to 10 minutes,
check that it is properly ventilated, and that
the air ow is not blocked or slowed down.
Power the device back up.
12