User Manual

IVTP-1M-DB
665mm 977 mm 431 mm 510 mm 410 mm 103 mm 290 mm
759 mm 1076 mm 494 mm 669 mm 465 mm 92 mm 320 mm
A
B C D E F G
IVTP-2M-DB
IVTP-3M-DB
IVTP-4M-DB
IVTP-5M-DB IVTP-6M-DB
pH +/-
B
A
D
E
C
G
F
INVERTEMP
DIMENSIONS:
HYDRAULIC CONNECTIONS:
– Water quality necessary for this device: NF-EN-16713-3
– The HP is compatible with all types of water treatment. The HP must imperatively be connected by a PVC pipe of Ø 50mm to the swimming pool’s hydraulic
circuit, after the lter and before the treatment system, regardless of its type (Cl, pH, Br metering pumps and/or electrolyser).
– Follow the hydraulic connection order (blue = water in, red = water out)
– A bypass must be installed to facilitate work on the HP.
– Before connecting the PVC pipes to the HP, make sure the circuit is clean of any work residue (stone, soil, etc.).
Connection of the condensate evacuation pack:
During operations, the HP is subject to a condensation phenomenon. This translates into a water ow, which can be more or less important depending on the
degree of humidity. To channel this ow, which can represent several litres of water per day, we recommend you install the provided condensate evacuation pack
and connect it to a suitable water evacuation circuit.
Provided connections
(ø 50mm)
HP
Condensate evacuation
Bypass Bypass valve
(adjustment)
Open valve
Half-open valve
Closed valve
FROM THE SWIMMING POOL
TOWARDS THE SWIMMING
POOL
Water treatment (disinfection, pH correction)
located after the HP
Models
5