pool/spa control system ScreenLogic PDA Quick Start Guide P/N 520602 Rev B IntelliTouch ScreenLogic PDA Quick Start Guide IntelliTouch ScreenLogic PDA Quick Start Guide
Technical Support Contact Technical Support at: Sanford, North Carolina (8 A.M. to 5 P.M.) Phone: (800) 831-7133 Fax: (919) 566-8920 Moorpark, California (8 A.M. to 5 P.M.) Phone: (800) 831-7133 Fax: (805) 530-0194 Web site: visit www.pentairpool.com Related IntelliTouch Manuals IntelliTouch ScreenLogic User’s Guide (P/N 520493) © 2005 Pentair Water Pool and Spa, Incorporated. 1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000 10951 West Los Angeles Ave.
4 1 Notes PDA First Time Setup Instructions Thank you for purchasing the IntelliTouch ScreenLogic PDA interface. Before you can use your PDA to operate your ScreenLogic system, you need to setup the ScreenLogic PDA program. The PDA must be in its cradle with power connected. Charging the PDA You need to charge the main battery and internal backup battery from empty to full. This takes about 8 hours the first time and 4 hours thereafter, whether the device is on or off.
2 3 5. Cut & Paste: Hold the stylus in the rectangle shaped box (9 to 10 o’clock) until you see the drop down menu display ‘Cut.” 14. The device will search and connect to the ScreenLogic wireless router. 6. Tap and hold 11:00 AM to paste then tap Next. 7. Select your time zone from the list, then tap Next. 8. Setup is complete. Tap the screen to begin using your device. 9. On the wireless screen, press the Wireless On/Off button as indicated on the screen then tap the screen to continue. 15.
