Use and Care Manual



Notice

your installation accordingly.
MEDIA SOAK
Garden
Hose
Hose Bib
Assembly
Water
Bypass Valve
Whole House Water Filter
INLET
OUTLET
Top View

Note: Steps 1-6 should be done prior to installation
1. Attach a garden hose to the Hose Bib Assembly.
2. Connect the Hose Bib Assembly to the inlet side of the Bypass Valve and hand tighten.
3. Fill the Pentair Carbon Water Filter slowly until water comes out of the outlet side of the Bypass Valve.
4. Turn the water off.
5.RemovethegardenhosefromtheHoseBibAssembly.Donotremovethetting.
6. Allow the carbon tank to soak for a minimum of 48 hours prior to installation.
CPELICAN WATER FILTER AND WATER SOFTENER ALTERNATIVE COMBO SYSTEM • 7