Use and Care Manual


to adapt to your plumbing. It is recommended that a shut-off valve and a bypass be plumbed in around
the system before installing the Pre-Filter system.
Notice
Top View Filter
Blue Filter Housing
Inlet Water
Supply
Mounting
Bracket
SEDIMENT FILTER INSTALLATION
Sediment Filter Cover
Sediment Filter
O-Ring x2
Stand Pipe
Blue Filter Housing
Part 1
1. Unscrewthecoverfromthebluelterhousing.
2.Removetheplasticcoveringfromthesedimentlter.
3.Placethesedimentlterontothestandpipeinthebluelterhousingandsetaside.
Part 2
1. Shut off the water.
2.Attachtheltercovertothemountingbracketusingthesuppliedboltheadscrewsandwashers.Makesuretoproperly 
 orientatetheINandOUTtomatchyourowpattern.
3. Attach the mounting bracket to the wall using the supplied phillips head screws.
4.Handtightenthebluelterhousingandthen,usingthesuppliedlterwrench,lightlysnugthehousingmakingsurenotto
over-tighten (counterclockwise).
5. Determine the size of your inlet water supply line.

typically installed in the "pre" position (as shown above) for well-water applications. For city water applications, the sediment

8 • PELICAN WATER FILTER AND WATER SOFTENER ALTERNATIVE COMBO SYSTEM