User Manual

9
Tagelus
®
Sand Filter Installation and User’s Guide
NOTE 1: Item 3A O-ring - Standpipe is used on model TA100D
Filters only. Item 3B O-ring - Standpipe is used on
Tagelus Filter models TA30, 40, 50, 60 manufactured
before April, 1993. Item 3B is not used on Tagelus
Clamp Filter models TA30D, 35D, 40D, 50D, 60D or
on any Tagelus models manufactured after April, 1993.
NOTE 2: Tagelus Clamp Filter models Tank & ft. assy. have
valve adptr. (Item 6) factory installed.
NOTE 3: Replacement of Tank ft. requires the use of mounting
tape. See part number listed.
NOTE 4: Lubricate O-ring liberally w/ silicone lubricant and
tighten to following spec: TA30D, 35D, 40D, 50D,
60D. Handtight plus ¼ turn min. TA100D Handtight
plus ¾ turn min.
NOTE 5: Tagelus Filter models TA30, 35, 40, 50, 60
manufactured after Nov. 1, 1991 were manufactured
w/ a btr. thread top opening and utilize a btr. style
valve which is black in color. A change was made to
the port arrangement in April, 1993 which will require
that minor changes be made to the valve plumbing
connections when replacing valves on filters
manufactured between Nov. ‘91 and Mar. ‘93. DO
NOT ATTEMPT TO INTERCHANGE THREAD
TYPES.
NOTE 6: Tagelus Filter models TA30, 40, 50, 60 manufactured
before Nov. 1, 1991 were manufactured w/ a “V” thread
style valve that is white or brown in color. These
valves may be replaced only w/ “V” thread style valve
P/N 261124, see Detail B. DO NOT ATTEMPT TO
INTERCHANGE THREAD TYPES.
NOTE 7: Tagelus Clamp Filter models TA30D, 35D, 40D, 50D,
60D manufactured after Nov. 1, 1991 were
manufactured w/ a btr. thread top opening and utilize a
btr. thread valve adptr. P/N 154555, see Detail A. DO
NOT ATTEMPT TO INTERCHANGE THREAD
TYPES.
NOTE 8: Tagelus Clamp Filter models TA30D, 40D, 50D, 60D
manufactured before Nov. 1, 1991 were manufactured
w/ a “V” thread top opening and utilize a “V” thread
valve adptr. P/N 155225, see Detail B). DO NOT
ATTEMPT TO INTERCHANGE THREAD TYPES.
NOTE 9: Tagelus Filter models TA 100D made before
December 1, 1993, have a different threaded
operation on the filter tank and require a different
8½” adaptor, P/N 154521.
To determine manufacture date,
the first 4 digits of the serial
number indicate the month and
year product was manufactured.
metI
.oN
.oNtraP
SEVLAVPMALC&.DHTHTIWSRETLIFSULEGAT
noitpircseD
A1605262ELYTSPMALCYAW-6.ni½1EVLAV 
A1581162ELYTSPMALCYAW-6.ni2EVLAV 
B1031162)5ETON(ATDAERHTSSERTTUBYAW-6.ni½1EVLAV
B1421162)6ETON(AT-DAERHT"V"YAW-6.ni½1EVLAV
A2145272.D.I.ni¾4X.ni61/3YDOBEVLAVGNIR-O 
A2333572.D.I.ni½6X.ni61/3YDOBEVLAVGNIR-O 
B239445106/05/04AT-.D.I.ni57.5X.ni751.YDOBEVLAVGNIR-O
A3033553)1ETON(.D.I.ni8/3-2X.ni8/1EPIPDNATSGNIR-O 
B3460551)1ETON(.D.I.ni8/7-1X.ni8/1EPIPDNATSGNIR-O 
4561251CITSALP,S/S.AID.ni½6PMALC 
4031251.AID.ni53.8PMALC 
5950091ERUSSERPTNUOMKCABEGUAG
6555451)7&4SETON(.DHTSSERTTUB.ni6RETPADA 
6522551)8&4SETON(DAERHT"V".ni6RETPADA 
6125451)9&4ETON(DAERHT.rtb.ni½8RETPADA 
7494451.D.I.ni57.5X.ni751.RETPADAEVLAVGNIR-O 
7916553.D.I.ni¼8X.ni8/1RETPADAEVLAVGNIR-O 
8200551S EPIPRETNEC,REZILIBAT
9672551&KNATTF)8&7,2SETON(RETPADAEVLAV/w.YSSA. 
9972551)8&7,2SETON(RETPADAEVLAV/w.YSSA.TF&KNAT 
9962551)8&7,2SETON(RETPADAEVLAV/w.YSSA.TF&KNAT 
9423551)8&7,2SETON(RETPADAEVLAV/w.YSSA.TF&KNAT 
9243551)6&5SETON(ELYTSDAERHTSSERTTUB.YSSA.TF&KNAT 
9343551)6&5SETON(ELYTSDAERHTSSERTTUB.YSSA.TF&KNAT 
9853551)6&5SETON(ELYTSDAERHTSSERTTUB.YSSA.TF&KNAT 
01160551).ni¾71=D.MID(.YSSAGNIPIP 
01260551).ni8/7-91=D.MID(.YSSAGNIPIP 
01433551).ni8/7-91=D.MID(.YSSAGNIPIP 
01360551).ni8/5-22=D.MID(.YSSAGNIPIP 
01992551orPraelC(.YSSAGNIPIP
®
).ni8/5-22=D.MID() 
01043551-.YSSAGNIPIPBUHSSEL).ni¼72=D.MID( 
01323551/w-.YSSAGNIPIPBUH).ni¼72=D.MID( 
TAGELUS
®
SAND FILTER
Replacement Parts
TA 40 / TA 40D



TA 50 / TA 50D



TA 60 / TA 60D



TA 100D



TA 60 (ClearPro
®
)



TA 50 (w/1/4 turn)


