User manual

11. Basicfunction
11.1 Wirelessconnection
The signals from a maximum of 4 cameras can be received. The camera with the
setisprogrammedinthefactorytochannel1.(seeChanelindicator[39])
The connection of the camera with the monitor is shown by the connection LED
[26] on the camera whilst the reception indicator [42] on thescreen displays the
receptionqualitywithupto4bars
andthe Connection LED [3] onmonitor lights
green.
After switching on the monitor or after pressing a button the monitor is in
. After 2 minutes without recording or without any button
being pressed the monitor will automatically switch to . The
desireddisplay can beselectedin idle mode(seeMenuoverview “systemsetup
/ multi channels idle display”). In both modes the live view of the paired and
activatedcamerascanbeobserved.
Select the full screen or quad display of the act vated cameras by
pressingthedirectionbuttons and .
In quad display the audio signal of only one of the paired cameras can be
heard,generallyofthelowestcamerachannel.Ifhoweverarecordingisstarted
via movement detectionfrom another camera,then the audiosignal from that
camera can be heard in live and recorded mode. When the recording is ended
the audio signal willremain fromthatcamera until motionis detectedthrough
anothercameraoruntilabuttonispressed.
Selectthedesiredvolumeusingthedirectionbuttons and .
Press the REC/DEL button [15], the display switches from full screen or
scan mode toquad mode, “REC INPROCESS WAIT14 SEC” appears and
the recording symbol [46] flashes. The recording is made in quad mode
(unlessonlyonecamerachannelisactivated).
To stop therecording, pressthe REC/DEL buttonagain, “REC RESUMES IN
4 SEC” appears, the display may revert to full screen or sequence mode
andtherecordingsymboldisappears.
setting mode
idle mode
11.2 Fullscreenor quaddisplay
11.3 Volume
11.4 Manualrecording
!
!
[44]
[1]
[1]
i
º»
¶·
Note:
Note:
Note:
#
#
!
!
!
#
#
!
!
!
!
!
!
During recording not all functions are available, the volume can be
changedandthealarmbuzzercanbeactivatedordeactivated.
The recording can be stopped after 14 seconds from the start of the
recording(“RECINPROCESSWAIT14SEC”disappears).
Infullscreendisplaya2xdigitalzoomcanbeactivated:
Press the ZOOM button[17]. Themiddle ofthefull picture willbe digitally
magnified (”2x” [44] and “ZOOM” appears on the screen). From quad
displaythepicturefromthelowestcamerachannelwillbemagnified.
Use the direction buttons [1] to navigate the magnified area within the
picture.
To leave the zoom mode, press the ZOOM button again. The previous
displayreturns.
The zoom function cannot be activated during recording (whilst record
symbol[46]flashes)
The zoom function is also selectable in the menu (see Menu overview:
“Zoom”)
To activate the alarm buzzer to sound after detected motion, press the
ALARMbutton[16]toselectbetweenALARMOFFandALARMON.
Thisfunctionisalsoselectableinthemenu(seeMenuoverview:“Alarm”)
Pressthemenubutton[5]toenterthemenu.
Pressthemenubuttonagaintoenterasubmenu.
Use the direction buttons [1] to navigate in the menu / submenu and to
changethesettings.
Pressthemenubuttontoconfirmortoselectasetting.
UsetheESCbutton[14]toreturnfromanoperation.
The menu closesautomatically 2 minutes after the last action and the monitor
revertstoidlemode.
11.5 Zoom
11.6 Alarmbuzzer
12.Menu
Note:
The menu cannot be opened whilst a recording is in progress (whilst
recordingsymbol[46]flashes).
Menuoverview
[48]
foreachofthechannels1to4[55]
[56]
Upto4camerascanbepairedwiththemonitor.Thecamerainthesetisalreadypairedwiththemonitoronchannel1.
• Pressthemenubutton[5].TheconnectionLED[3]onthemonitorflashesgreen.
• Pressthepairingbutton[30]onthenewcamera.
Thepairing is complete whenthe connection LED[3] onthe monitor andthe connection LED[26] onthe cameralight permanently green.
cameraisnowpairedtotheselectedchannel.Ifanothercamerawasalreadypairedtothischannel,theoldcamerawillbedeletedfromthe
system.Ifthenewlypairedcamerawasalreadypairedonanotherchannel,thepreviouspairingwillbedeleted.
[57]
CAMERASETUP
Paircamerawithmonitor(PAIRANEWDEVICE)
Setthepicturebrightness(IMAGEBRIGHTNESS)
Default:middle
36 - GB