User manual

ManualsBrandsPENTATECH ManualsSurveillance CamerasWireless CCTV system 4-channel incl. 2 cameras DF400

is opened, when the storage is full (only when the ring function is disabled) and also through the App when in „remote record settings“ the corresponding

buttonismovedtotheleftorwhen„remotesettings“isselected.

Byclickingthissymbolallactivatedcameraswillberecorded,irrespectiveofwhichdisplaymodeisonthescreen.

Successivefiles,eachapprox.5minuteslong,willberecordeduntiltherecordingisstopped.Thishappenswhenthesymbolisreclicked,whenthemainmenu

is opened, when the storage is full (only when the ring function is disabled) and also through the App when in „remote record settings“ all the camera

buttonsaremovedtotheleftorwhen„remotesettings“isselected.

Selectintheleftcolumnthecamerachannel1to4[48]forwhichthefollowingcanbeset:

To pair a camera to a channel,click thissymbol until„Pairing...“ is displayed.Within 35 seconds hold thepairing button[27] onthe

camerapressedforaprox.2seconds.Thesuccessfulpairingisdisplayedas„PairingOK“

Clickonthissymboluntiltherequiredsetting„I“(activated)or„0“(deactivated)lightsred.

Thedatafromadeactivatedcameracannotbedisplayedorrecorded

Click on this symbol until the required setting „High“ (higher resolution, more pixels, causes lower frame rate) or „Low“ (lower

resolution,lesspixels,causeshigherframerate)isdisplayed.

Ifimagedetailisimportantselect„High“.Ifahigherframerateisimportantorifthesystemistobeoperatedonlythrough

theAppthenselect„Low“.

Clickonthissymboluntiltherequiredsetting„High“(higherimage quality, causes lower frame rate) or „Low“ (lower quality, causes

higherframerate)isdisplayed.

Foradifferentselectionas„allcameras“[57]clickoncewiththerightmousebutton.Nowselectinthetoprowacameraforwhich

therecordingistobeset.

Setthefiveperiods(correspondingtothe5lines[58])forthiscamera.

Clickonthegreyareatothelefttoselectthemethodofrecording:

inthesetperiodthemotiondetectionisactive

constantrecordinginthesetperiod

emptyarea no(automatic)recording

Selectthedaysforwhichtherecordingisappicable(onlyoneday/daily/MondaytoFriday/MondaytoSaturday).

Setthestarttime andendtimefortherecordingperiodwithhour(24hourclock)andminute.

Aftersettingthetimeperiod,clickwiththerightmousebuttonuntil„savingsettings.Pleasewait...“isdisplayed.

Afterthesettingshavebeensavedthenrepeatforanothercameraifrequired.

Ifanothercameraisselectedwithoutsavingthesettingforthepreviouscamera,thenthesettingsforthepreviouscamerawillnot

besaved.

Byclickingrepeatedlyonthedesiredcamerathedesiredsettingcanbemade

PIR MotiondetectiononlyviaPIRsensoronthecamera(

PIRandadditionallymotiondetctionviapixelchanges(low,middle,high)

PIR sensor and additionally motion detction via software through pixel changes (low, middle, high sensitivity) in

preselectedareasofthecameraimage.

ThesensitivityanddetectionareaofthePIRsensorarefixed,itreactswithinahorizontalangleapprox.60°.

Manualrecording audio/videofromallcameras

12.3 Mainmenu (seefig.D)

[43] Camerasettings(seefig.E)

[49] Pairing(paircamerawitha channel)

[50] Activateordeactivatecamera

[52] Imageresolution

[51] Imagequality

[44] RecordingSettings(seefig.F)

[53] Recordschedule(selecttime periodandmethodofautomaticrecording)

[54] Methodofmotiondetection

Factory setting: 1 and2 activated,camera 3and 4 deactivated

Factory setting: High

Factory setting: all camerasrecord uponmotion detection,all day,everyday

Factory setting)

Note:

•

44 - GB