User manual

Setusingthearrows (YYYY-year/MM-month/DD–date /HH-hour/MMminute).

SelectfromEnglish,French,Spanish,German,Japanese,etc.

Clickonthesymboluntilitlightsred(symbolactivated)oritdoesnotlight(symoldeactivated).

Thesymboldoesnotappearonrecordings

Clickonthesymboluntilitlightsred(symbolactivated)oritdoesnotlight(symboldeactivated).

Ifthestampisdeactivatedatthetimeofarecording, dateandtimewillnotbeshownontherecording.

Ifthemenuisclosedthedisplaychangesaftertwominuteswithoutamouseclickintopassivemode.Here thedesireddisplaycanbe

set: Quad /Smart-Quad /sequence with 10second interval/ sequence with5 secondinterval. In sequenceall activatedcameras will

bedisplayedinturn.

Alsoinsequencemodeautomaticandmanualrecordingscanbemade.

Select here if the display should switched off after 5 or 10 minutes with no mouse click, or if it should always be on. The display will

automaticallyswitchonbymouseclick,bymotiondetectionorbythestartofscheduledrecording.

Fortheconnected storagethetotaland thefreestoragecapacitywill beshown.Clickon thestorageontowhichshould berecorded(left

symbolforUSBandrightsymbolformicroSDcard).Clickagaintoselectordeselectringstorage[71].

Selectonlyastoragewhichisconnectedtothesmartrecorder.Ifastorageisselectedthatisnotavailable,norecordingwillbe

made.Thisproblemwillnotbeindicatedonthedisplayforautomaticrecording,onlybymanualrecordingwillthisproblembe

indicatedonthedisplay.

If theringstoragefunctionisnotselected,andthestorageisfull,nomorerecordingscanbemade.Inthiscaseinsertanew

storage,deletetherecordingsby„StorageFormat“[68]oractivatetheringfunction.

ThestoragemediumisshownonthelivedisplaybythesymbolYYYformicroSDcardandbyYYYforUSBdevice.

Selectthestoragedeviceforformatting.

Afterformattingalldatawillbedeleted

DonotchangetheDHCPsetting(thisenablestheautomaticconnectionofthesmartrecordertothenetwork)

Tochangethepassword,clickon„DCHP“,enterthenewpasswordandconfirmbyclicking„OK“.

Followingdataisdisplayed: Firmwareversion/internetsetting/informationofpairedcameras/DID(deviceidentificationnumberof

thesmartrecorder)/password.

TheQRcodeonthedisplayalsocontainstheDID

[47] Systemsettings(seefig. H)

[62] Dateandtime

[63] Menulanguage

[64] Displaysettings

Receptionsymbol

Dateand timestamp

[65] Displayinpassivemode

[66] Energysavingmode

[46] Storagesettings(seefig.I)

[67] Selectstorageforrecording/ activateringmode

[68] Formatstoragedevice

[69] Networksettings/changepassword

[70] Systeminformation/Firmwareupdate

Factory setting: activated

Factory setting: Smart-Quad

Factory setting: always on

Note:

•

46 - GB