User manual

12.1 TimeSetup [42]- settime anddate
12.2 Camera Setup[43] -camera activation
12.3 Pairing[44]- pairingof cameraand monitor
12.4 Power-Saving [45]- powersavingmode
12.5 Scan Period[47] -automatic switching/ quaddisplay
12.6 Brightness [50]- setbrightness
12.7 FactoryDefault [51]- reset
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
PresstheOKbuttononce.
Set time and date using the direction buttons and confirm with the OK
button.
PM-afternoon AM-morning
Usethedirectionbuttonstoselecttherequiredchannel.
Use the OK button toactivate (ON) or deactivate(OFF) the camera paired
onthatchannel.
Thecamera includedinthe setis already pairedwith the monitoron channel 1.
If you wish to pair the camera to a different channel or pair an additional
camera(max.3additionalcameras)tothemonitor:
OpentheOSDmenubypressingthemenubutton[13].
Selectthedesiredchannelusingthedirectionbuttons.
ConfirmusingtheOKbutton.
Pressthepairingbutton[28]ofthecamerawithin60seconds.
Activate(ON)ordeactivate(OFF)usingthedirectionbuttons.
ConfirmusingtheOKbutton.
If the power saving mode is activated the camera picture will disappear after
approx2 minutes ifno buttons arepressed, theaudiofunctionremains onand
the power LED is still illuminated. The picture can be recalled by pressing any
button.
These functions can be used when more than one camera is paired to the
monitor.
Using the direction buttons select between OFF (no switching or quad
display),5Sec.or15 Sec.(automatic switchingin 5or 15second interval,
between the activated channels) or Quad (Quad display): up to 4 camera
pictures are displayed in split screen, if a camera is not connected or not
activated, then the corresponding area of the screen remains black. You
can use the direction buttons to switch between the different areas of the
screen.
ConfirmusingtheOK-button.
Select the desired picture brightness (value 0 through 5) using the
directionbuttons
SelectYESusingthedirectionbuttonstoresettofactorydefaultsettings.
ConfirmusingtheOKbutton.
camerasetup: channel1ON/channel2OFF/channel3OFF/channel4OFF
powersaving: ON
Scanperiod: OFF
brightness: 3
factorydefaultsettings:
12.8 Playback [48]- playbackof recordings
12.9 SD Card Format [49] - formatting of SD card / deletion
of recordings
!
!
!
!
#
#
#
#
#
#
#
#
!
!
Use the direction and OK button to select the desired date file (in
chronologicalorder)andthedesiredrecording(markedwithgreencursor).
Press the OK buttonto selectthe recording,the firstframe ofthe recording
isshown.
Usethedirectionbuttons [12: / ]to 2x/4x/8xfastforward orreverse.
Withthe[12: ]buttontheplaybackcan bestopped.Use themenubuttonto
go back to the datefile. Alternatively the videoson the SD-card canbe viewed
onaPCwithavideoviewerapplication(Mediaplayer).
Usethedirectionbuttonstoselectformat
ConfirmwiththeOKbutton
FormattingdeletesalldataontheSD-card.
If the SD-card is full, all the data must be deleted before recording can
recommence.
The wireless range is dependent on many factors. In an ideal location and by
free lineof sight (between both antennas)a rangeof upto 150 m is possible,
within buildings this is reducedto maybe 20 m.
Therangecannotbeguaranteedasitisdependentonthelocalconditions.
A reduction of the rangewill be caused by:
Walls and Floors, in particularthose of metal or with metalreinforcement
Coated windows (eg. those with Insulating glass), radiators, mirrors and
other metal surfaces
Electrical cables and electrical products (eg. Those containing electrical
motors, microwave ovens)
Devices using the same orsimilar frequency eg. WLAN-systems)
The products are maintenance-free: donot open the housings
Check the safety and functionregularly
Remove the mains adapters fromthe mains sockets before cleaning
Use a soft, slightly moistcloth or brush to clean thesurfaces
Additional camera DF20K withaccessoires. Art. Nr.27267
Antenna extension cable for camerawith wallbracket
RG142SMS-2M, length 2 m, absorption1,6 dB, Art. Nr. 27243
RG142SMS-4M, length 4 m, absorption3,2 dB, Art. Nr. 27244
Packaging material or electrical products must not be disposed of as
household waste. Use your recycling system. Details are available
from your local authority.
13. Wirelessrange
14. Maintenance and cleaning
15. Optional Accessories
16. Disposal
24 - GB