Manual

ProperUse
AreasofApplication
SafetyInstructions
Contents
The wireless acoustic pressure mat consists of a pressure mat containing a sensor foil and a wireless
transmitter, andan alarmunit includinga wirelessreceiver. Ifthe matis presseddown, itwill triggeran
opticalandacousticsignalatthealarmunit.
The wireless transmitter and receiver are already coded and marked with a corresoponding channel
number(CH-Nr).
The wirelesstransmitter ispowered by aCR2032 lithiumbattery; thealarm unitis powered by3 x1,5 V
typeCbatteriesorbyasuitable6Vpowersupply.
Protects your entry effectively and discretely. Simply place the mat under a carpet or doormat. You can
choosebetweenaloudalarmsirenorachime.
Thedoormatalerts youwhentheresidentor yourchildleavesthebed orroom.Thisallowsyou tointervene
quicklyandpreventfalls,disorientationandotherdangers.
Insteadofhaving tokeepcheckingifyour cathas finallycomehome:whenyour catsitsonthemat infront
ofthe closed door(e.g.front door, back dooror patio door), youwill hear the doorchimeinside the house.
Simplyplacethematunderadoormat(oratowel)infrontofthedoorandthealarmunitinsidethehouse.
Thechimesoundsinside,thecatwillnotbedisturbedbythenoise.
Idealforvirtuallyallentrancedoorways.Howeverdonotexposethemattorainorwater.
Placethematunderasoftdoormatoratowel( )thatyourcatlikestositon.
Read this users manual carefully before installing or using your acoustic pressure mat. Check the
pressurematalarmfordamage.Donotoperateadamagedunit!
Only usethe acousticpressure matalarm indry locationsindoors orin aprotected locationoutdoors.
Donotexposetheunittorainorwater.
Leaking or damaged batteries can cause damage to your skin when touching them. In this case, use
appropriatesafetygloves.
Iftheunitisnotusedforalongerperiodoftime,removethebatteryfromthebatterycompartment.
Beforedrillingholes,checkthewallforconcealedelectriccables.
Do not let children play with the units. Makesure that children do not take individual parts into their
mouth.
pressurematincludingwirelesstransmitter
CR2032lithiumbatteryforwirelesstransmitter
alarmunit
2screwsand2wallplugs
3 x type C batteriesLR1400, MN1400; alternatively: 6 Vpower supply, min. 200 mA (e.g.NG600U,
art.no.32108)
1xcarpet,doormatortowelforcoveringthepressuremat
Always observe all the safety instructions. If you have any questions or are unsure about using the
equipment, ask a specialist or obtain information online at www.indexa.de. Keep this manual in a safe
placeandpassitontothirdpartiesifnecessary.
Typical areas of application are listed below. Any other use or modification of the equipment is not
authorised and presents significant risks of accident. No liability will be accepted for consequential
damagesorfordamagescausedbyimproperuseorincorrectoperation.
This equipment is not suitable for use by persons (including children) with limited physical, sensory, or
mental abilities or with lacking experience or lacking knowledge unless they are supervised by a person
responsible for their safety or obtain instructions on how to use the equipment. Children must be
supervisedtomakesuretheydonotplaywiththeequipment.
Asan alarmor visitorchime
Canbe usedin care/childcare
Asa "CatDoorbell"
Alsorequired:
!
!
!
!
!
!
!
!
!
!
!
!
!
notsupplied
Description
TechnicalData
1 alarmunit
2 LED:triggering
3 LED:batterywarning
4 sounder
5 chimevolumecontrol
6 powersupplyconnection
Operatingvoltage: 3V
Currentconsumption: 4 A(standby);5mA(activation)
Battery: CR2032(lithium)
Material: synthetic,black
Dimensions: 560x360mm
Operatingtemperature: -5°Cto+40°C
Operatingvoltage: 3,7-5 V
Currentconsumption: 0,5mA(standby);120mA(activation)
Battery: 3x1,5VtypeC/LR1400(alkaline)
Powersupply: 6V,min.200mA
plug:2,1/5,5mm,12mmlength,positiveinternalpole
Loudness: alarm:approx.95dB(A)loud
chime:approx.90dB(A)quiet
chime:approx.60dB(A)
Material: synthetic,white
Dimensions: 94x130x42mm
Operatingtemperature: Cto+40°C
Frequencyband: 433,05MHz-434,79MHz
Maximum radiated transmission power: < 10 mW
Radio range: max. 60 m (in open field)
Radio coding: transmitter TMF01T and receiver TMF01S are encoded with
each other ex works (corresponding CH No.)
transmitter
CR2032 lithium battery supplied with the
labeledside (+) facingupinto the batterycompartment
(seefig.2)andclosethebatterycompartment.
Insertthe transmitter close
InsertingtheBatteryintothePressureMat
PressurematTMF01T
Radiocharacteristics
Sensor: contactfoil
Open the Velcro fastener located at the side of the
pressurematand takeout thetransmitter[10].
Open the battery compartment [12] with a
screwdriver(seefig.1).
Insert the
Test the function of the transmitter: When pressing the
pressuremat,theLED[11]shouldlightup.
intothe pressure mat, and the
Velcrofastener.
"
"
F
Alarmunit TMF01S
!
!
!
!
!
ACOUSTIC PRESSURE MAT TMF01
User Manual
7 signal setting
8 alarm unit battery compartment
9 suspension
10 wireless transmitter
11 LED: triggering (on other side)
12 transmitter battery compartment
8
6
7
POWER
23
2
4
5
11
12
fig. 1
fig. 2
1
0
9 9
10