User manual

User Manual
1. Introduction
2. Properuse
4. Technicaldata
Read through this user manual completely and carefully.
Always observe all the safety instructions. If you have any questions or are
unsureabout usingthe equipment,askaspecialistorobtaininformationon
line at www.indexa.de. Keep this manual in a safe place and pass it on to
thirdpartiesifnecessary.
The additional handset TF04M consists of a handset TF04M with a charger
TF04L and mains adapter. The additional handset is suitable for use with
thedoorintercomTF04Set.ItmustberegisteredtothebaseTF04B.
The door intercom TF04 Set can be expanded with up to three further
handsetsTF04M.Internalcommunicationbetweenhandsetsispossible.
The system uses DECT/GAP standard. Compatibility with components from
othermanufacturerscannotbeguaranteed.Thedooropeningfunctionisnot
availableincombinationwithsuchcomponents
The handset, charger and mains adapter must be kept dry. The charger is
powered through the 7.5 V DC mains adapter which is connected to
230 VAC, 50 Hz. The handset is powered by two Ni-MH rechargeable
batteries which are automatically recharged when the handset is placed in
thecharger.
Any other use or modification of the equipment is not authorised and
presents significant risks of accident. No liability will be accepted for
consequential damagesorfor damages caused by improper useorincorrect
operation.
This equipment is not suitable for use by persons (including children) with
limited physical, sensory, or mental abilities or with lacking experience or
lacking knowledge unless they are supervised by a person responsible for
their safety or obtain instructions on how to use the equipment. Children
mustbesupervisedtomakesuretheydonotplaywiththeequipment.
Powersupply: 2xNi-MHbatteriesAAA,1.2V;600mAh
Chargingvoltage: fromcharger
Initialchargingduration: 15hours
Standbytime: upto180hours
Talktime: upto8hours
RFrangetobase: upto30mindoors,upto200minfreespace
RFmodulation: GFSK
HandsetTF04M
As the additional
handsetis forusetogetherwiththeTF04Set, referalso tothe manualofthe
set. The manual of the set is the master manual and it contains the safety
instructions and information relating to the location, installation,
connectionanduseofthehandset.
Handset TF04M
2x AAA Ni-MH Batteries
Charger TF04L
Mains adapter 7.5V for charger
User Manual
3.Packagecontents
!
!
!
!
!
Operatingtemperature: 0°Cto+40°C
Dimensions: approx.48x159x29mm
Weight: approx.132g
Operatingvoltage: 7.5 VDC(mainsadapter)
Currentconsumption: max.300A,
Operatingtemperature: 0°Cto+40°C
Dimensions: 90x90x60mm
Powersupply: 230V,50Hz,150mA
Poweroutput: 7.5 V,300mA,2.25VA
Application: indooruseonly
Connectthemainsadapterofthebasetothepowersupply.Thehandset
willbeeptwice.
The batteries in the handset are charged automatically after the
handsethasbeen placedintheconnectedbase.
Watch the
battery charge indicator on the display display [41] (three black bars
= batteries are fully charged, one black bar = very low battery
power). If the batteries do not reach their full capacity after charging,
they should be replaced. When you place the handset in the base, it
automaticallyturnson.
Theunitsaremaintenance-free.Donotopenthem.
Regularlycheckthetechnicalsafetyandfunction
Before you clean the device, pull the mains adapter out of the mains
socket.
Use a soft, dry or slightly moist cloth or a dry brush for cleaning the
surfaces.
ChangerTF04L
Mainsadapter
5. Operation
ntenance+cleaning
RefertousermanualTF04Set
Operation
Registrationoffurtherhandsets
!
#
#
#
#
Thebatteriesshould be
fully charged for about 15 hours before initial operation.
!
!
!
!
!
!
!
!
Pressand holdthe pager buttonon the bottomof thebasefor atleast5
seconds.
Pressthe“Menu”key .
Pressthe or keyrepeatedlytochoose“Registration”.
Pressthe“Select”key .
Use or keytoscrollthroughthebasenameslist.
Pressthe“Select”key tochooseabase.
Assoonas thebase isfound,and thehandset issuccessfullyregistered,
youwillbepromptedtoenterthePINcode(thedefaultoneis0000).
Press the “Select” key . On validation of the PIN code, the
registration tone will sound and the base assigns a number to the
handset. If the PIN code entered is invalid, a warning tone will sound,
andthehandsetwillreturntothepreviousregistrationstate.Ifthebaseis
not found, the handset will behave according to the Out of Range
condition.
6. Mai
GB
GB-6