User manual

GB-61
11. Basicsettings
12. Registrationoffurtherhandsets
13. Radio range
#
#
#
#
#
!
!
!
!
!
!
!
#
#
#
#
Selectingalanguageseechapter22.5
Factorydefault:German
Settingdateandtimeseechapter22.8
Settingtheringtone(melodyandvolume)seechapter22.3
Setting the audio volume of your conversational partner see chapter
22.2
ThesuppliedhandsetisalreadyregisteredwiththenumberMT1.
The range of the radio transmission depends on various parameters. Under
ideal conditions up to 200 m can be achieved in free space (between door
unit and base as well as between base and handset), indoors the range is
onlyupto30m.
A guarantee for this range cannot be given, as the local conditions at the
installationsitemayinterferewithit.
Theradiorangecanbeaffectedbythefollowing:
walls and ceilings, especially those made from reinforced concrete or
metal
coatedwindows (e.g. energysavingwindows), radiators,mirrors,metal
surfaces
electricalwiresandelectricdevices(e.g.electricmotor,microwaveoven)
deviceswiththesameoranadjacentfrequency.
Thestrengthofthereceivedradiosignalsisdisplayedwiththeicon :
blinkingicon =weakorlostsignal
permanentlyflashingicon =goodradiocommunication
Youcanregisterupto4handsetstothesamebase(seechapter27"Optional
accessories").
Press and hold the pager button [59] on the bottom of the base for at
least5seconds.Thanpressthe“Menu”key .
Pressthe or keyrepeatedlytochoose“Registration”.
Pressthe“Select”key .
Use or keytoscrollthroughthebasenameslist.
Pressthe“Select”key tochooseabase.
As soon as the base is found, and the handset is successfully registered,
youwillbepromptedtoenterthePINcode(thedefaultoneis0000).
Pressthe“Select”key .OnvalidationofthePINcode,theregistration
tone will sound and the base assigns a number to the handset. If the PIN
code entered is invalid, a warning tone will sound, and the handset will
return to the previous registration state. If the base is not found, the
handsetwillbehaveaccordingtotheOutofRangecondition.
14
When the visitor presses the bell button [3], the door unit and all
registered handsets will ring for up to 1 minute. The display display
showse.g. "HS2Calling”. Totalk withthe visitor,pick upthehandset or
pressthedial/speakerkey[50].
To end the conversation, press the end key
etup
aconferencecallwithanexternallineandaninternal
handset
. Doorintercomfunction
15. Descriptionofthekeys/display
!
!
!
!
[44] or place the handset in
thebase.
If a door release is connectedto the door unit, the door can be unlocked
bypressingthehashkey[45]forapprox.5-6seconds.
If a visitor presses the bell button while you are having a telephone
conversation, you will hear a callwaiting signal, but youcannot answer
yourvisitor'scall.Ifanotherhandsetisregistered,itwillringandyoucan
talktoyourvisitorwiththishandset.
tomake/answera call;activatesthespeaker ifpressedduring
acall
toendacall;pressingandholdingturnsthehandseton/off
toopen menufunctions instandby mode;to confirmselection
andaction;toperform"flash"function
Redial, to return to the previous menu; to mute the
microphoneduringacall;todeleteanincorrectinput
to scroll up through lists and menu options; to
increase the earpiece/speaker volume during a call;
toopentheCIDbook
to scroll down through lists and menu options; to
reduce the earpiece/speaker volume during a call; to
openthephonebook
to set up an internal call to another handset; to
transferanincomingcalltoanotherhandset;tos
15.1 Keyfunctions(seefig.B)
Dial/speaker[50]
End/power[44]
Menu/Select[51]
Redial/Back[42]
Navigationkeys/furtherfunctions[43]
up/CIDbook[65]
down/phonebook[66]
INT[67]