User manual

GB-68
!
!
!
!
!
!
!
!
!
!
Pressthe key.
Use and keytoselect“AutoAnswer”.
Pressthe key.
Use and keytoselect“HSSettings”.
Pressthe key.
Use and keytoselect“Date&Time”.
Pressthe key.
Pressthe”Select” key.Thedisplayshowsthecurrentsetting.
Use or keytoselect“DD-MM”(DayDay-MonthMonth)or
“MM-DD”(DayDay-MonthMonth).
Pressthe“Save” key.
Use or keytoselect“12-Hour”or“24-Hour”.
Pressthe“Save” key.
Enterthedatewiththenumerickeys0to9.
Pressthe“Save” key.
Enterthetimewiththenumerickeys0to9.
Pressthe“Save” key.
Use and keytoselect“HSSettings”.
Pressthe key.
Use and keytoselect“SelectBase”.
Pressthe key.
Thedisplayshowsthecurrentsetting.
Use or keytoselectONorOFFtoenableordisablethefunction.
Pressthe“Save” key.Youwillhearaconfirmationbeep.
Factorydefault:On
Use or key tochoose between“Date Format”, “Time
Format”,“SetDate”or“SetTime”.
Factorydefault:DateFormat:DD-MM,TimeFormat:24-Hour
!
!
!
!
!
!
!
!
!
!
!
!
21.8 Settingdateand time(Date&Time)
21.9 Selectingabase (SelectBase)
DateFormat
TimeFormat
SetDate
SetTime
“Select” "Alarm"appears.
“Select”
Pressthe“Menu” key.
“Select” "Alarm"appears.
“Select”
Pressthe“Menu” key.
“Select” "Alarm"appears.
“Select”
!
!
!
!
This function allowsyou toselect abase from thosealready registeredto the
handset(upto4basescanberegisteredtoonehandset).
Thedisplaytheshowsthecurrentbase.
Use or keytoselectthedesiredbase.
Press the “Select” key. If you select a non-existent base, the
handset will sound a warning tone. After a short time, a confirmation
melody will sound, and the name of the handset will change
respectively.
Note:
Notes:
Thehandsetwillonly workwiththebaseit haslastbeenregisteredto, orwith
theselectedbase.
If the registration of a handset was deleted, it can be registered to the
baseagainasdescribedabove.
Toregister a registeredhandset toanother base,simply followthe steps
describedabovewithanotherbase.
Thehandset willonlywork withthebaseit haslastbeenregistered to,or
withtheselectedbase(seechapter22.9).
21.10 Resettingthe handset(HSReset)
!
!
!
!
!
!
!
Use and keytoselect“HSSettings”.
Pressthe key.
Use and keytoselect“HSReset”.
Pressthe key.
Use and keytoselect“Registration”.
!
!
!
!
!
!
22. Registering a handset to a base
(Registration)
Pressthe“Menu” key.
“Select” "Alarm"appears.
“Select”
Pressthe“Menu” key.
Pressthe“Select”key .
Use or keytoscrollthroughthebasenameslist(”Base1”to
“Base4”.
Pressthe“Select”key tochooseabase.
As soon asthe base isfound, andthe handsetis successfullyregistered,
youwillbepromptedtoenterthePINcode(thedefaultoneis0000).
!
!
!
!
Thedisplayshows"PIN ?".
EnterthecurrentPINcode.
Press the “Reset” key. If the PIN code is validated, all Base
settings will be returned to the factory default. Otherwise a warning
sound will be heard and the settings will remain. After resetting, the
handsetwillreturntostandbymode.
The supplied handset is already registered with the number 1. You can
register up to 5 handsets/door units to the same base (see chapter 27
"Optionalaccessories").Ahandsetcanberegisteredtoupto4bases.
Press and hold the key [59] on the bottom of the base for at least 5
seconds.
Press the key. On validationof the PIN code, the registration tone
willsoundandthe baseassignsanumberto thehandset.IfthePIN code
enteredisinvalid,awarningtone willsound,andthehandset willreturn
to the previous registration state. If the base is not found, the handset
willbehaveaccordingtotheOutofRangecondition.
!