User manual

GB-69
23. Callingwithmorethanonehandset
23.1 Internalcall
23.2 Calltransferbetween handsets
23.3 Settingupa conferencecall
!
!
!
!
!
!
!
!
!
!
Pressthe key.Thedisplayshowsthefollowingmessage:
Enter the number of the handset you want to call (e.g. "3" for handset
3).
key.
If an externalcall comes induring an internalcall or aconversation with the
door unit, the display willshow the caller's numberand two short beeps will
beheard.
Press the key to end the internal call. Shortly after that your
telephoneswillringwiththeincomingcall.
Nowanswertheexternalcallwiththe key.
Itisnotpossibletocalladoorunitfromahandset.
Notes:
If you have more than one handset registered to the same base, you can
makeinternalcalls,transferexternalcallsbetweentheregistered
handsets,andsetupaconferencecall.
If the handset entered is valid, the called handset will ring and
display“HSXCalling”.
Thehandsetusercanpressthe keytoanswertheinternalcall.
Toendyourconversation,pressthe
Youcan transfer anexternal call betweenhandsets thatare registeredto the
samebase.
Duringanexternalcall,pressthe key.
Enterthenumberofthehandsetyouwanttotransferthecallto.
If the called party wants to answer your call, he/she can press the
key to talk with you. At this time you can inform him/her of the
incomingcall.
When the called party wants to answer the external call, press the
keyorreplacethehandsettothebasetocompletethetransfer.
Whenyou have bothanexternalcalland an internalcallinprogress,you can
setupa3-wayconferencecalllikethis:
1. During an external call, press the keyandthen enter the number of
thehandsetyouwanttojointhe3-waycall.
2. Thecalledpartypressesthe keytoanswer.
3. Thecallingpartypressesthe keytostartthe3-waycall.
4. Eitherofthetwohandsetscanpressthe keytoleavetheconference
callatanytime.
Note:
Note:
Ifone of the handsets leaves the conferencecall,theremaininghandsetswill
continuetheconference.
If you have transferred an external call to another handset, you cannot use
thecall-waitingfunctionviathesecondhandset.
If the ringtone atthe doorunit is weakor nocommunication is possible,the
batteriesinthedoorunitshouldbereplaced:
Usethesuppliedtorxwrench[24]toremovethetorxscrew[23]fromthe
hole[12].
Pullthedoorunit[1]upwardsandoutofthebracket[15].
Open the battery compartment [13] of the door unit by sliding the
batterycompartmentcover[11]down.
Removeanddisposeoftheoldbatteries.
Insert two new alkaline LR14 (C), 1.5 V batteries into the battery
compartment, watching for the correct polarity. The door unit will ring
once.
Replacethebatterycompartmentcover.
Slidethedoorunitbackontothebracket.
Screwthetorxscrewbackintothedoorunit.
Ifthebatteriesinthehandsetdischargetooquickly,theyshouldbereplaced:
Open the battery compartment [53] of the handset [39] by sliding the
batterycompartmentcover[55]down.
Removeanddisposeoftheoldbatteries.
Insert two new Ni-MH batteriesAAA, 1.2V; 600 mAh batteries intothe
batterycompartment,watchingforthecorrectpolarity.
Replacethebatterycompartmentcover.
24. CallerIDoncallwaiting
25. Changingbatteries
!
!
!
!
!
!
!
!
!
!
!
!
!
!
25.1 Doorunit
25.2 Handset
When you subscribe to Call Waiting service from your local telephone
company,the handset will displaythenameandnumber of thesecondcaller
whileyouarehavingaconversation.
Pressthe“flash” keytoanswerthesecondcaller.
If you press the key, you can continue with your
conversationwiththefirstcaller.
“flash”
12345
Back