user manual
Table Of Contents
- For Using Your Camera Safely
- Care to be Taken During Handling
- Contents
- Composition of the Operating Manual
- 1 Before Using Your Camera
- 2 Getting Started
- 3 Basic Operations
- 4 Shooting Functions
- 5 Shooting Settings
- 6 Playback Functions and Image Editing
- 7 Changing Additional Settings
- 8 Connecting to a Computer
- 9 Using the Flash
- 10 Appendix
174
Playback Functions and Image Editing
6
Developing RAW Images
You can convert captured RAW images into JPEG images, and save them
as new files.
1
Select a RAW image in the single image display, and press
the four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select h (RAW
Development), and press the 4 button.
The screen to select a development method is displayed.
3
Use the four-way controller (23)
to select [Developing a single
image], and press the 4 button.
The parameters saved in the image file
appear.
Proceed to Step 6 if you do not need to
change the parameters.
4
Use the four-way controller (23)
to choose a parameter you want
to change.
You can select a different image by
turning the e-dial.
Only RAW images captured with this camera can be edited. RAW images and
JPEG images captured with other cameras cannot be edited on this camera.
Developing One RAW Image
MENU
OK
OK
OK
Developing a single image
Developing a single image
Developing multiple images
Developing multiple images
MENU
OK
Image Capture Settings
Image Capture Settings
100-0001
100-0001