User Manual

5
Settings
79
4 Press E.
5 Press F.
The screen of Step 2 reappears.
Repeat Steps 2 to 5.
6 Press F twice.
u Caution
• [LCD Panel Illumination] in [RAW/Fx Button] cannot be
selected when [21. LCD Panel Illumination] is set to [Off] in
the E3 menu.
Select the file format to change to when P is pressed for
each [File Format] setting.
1 Set [RAW/Fx Button] to [One Push File Format]
in Step 3 of “Setting the Button Operation”
(p.78).
2 Select T or S for [Cancel after 1 shot].
3 Select the file format when
P is pressed.
The left side is the [File Format]
setting and the right side is the
changed file format when P is
pressed.
u Caution
• The One Push File Format function cannot be used when
[Memory Card Options] in the A1 menu is set to [Separate
RAW/JPEG]. (p.37)
AF
Button
Enable AF1
Autofocus is performed
when I is pressed.
p.44
Enable AF2
Autofocus is performed
when I is pressed.
Half press of the shutter
release button is
disabled.
Cancel AF
While I is pressed,
half press of the shutter
release button is
disabled.
Preview
Dial
Optical
Preview
Activates the Optical
Preview function.
p.47
Digital
Preview
Activates the Digital
Preview function.
Setting Function Page
Setting the One Push File Format
T
The recording format returns to the [File Format]
setting of [Image Capture Settings] in the A1 menu
after a picture is taken.
S
The setting is retained until any of the following
operations is performed:
• When P is pressed again
• When 3, F, or G is pressed, or when the
mode dial or main switch is turned
One Pu sh Fil e Form at
One Push File Format
RAW/F x Butt on
RAW/Fx Button
Cancel
Cancel
OK
OK
Cancel after 1 sho t
Cancel after 1 shot