User Manual

5
Settings
86
A memory card with a built-in wireless LAN (Wi-Fi) “Eye-Fi card”
or a “Flucard” compatible with this camera can be used. By
using these cards, images can be transferred from the camera
to a computer or other device via wireless LAN.
You can set the camera action for when an Eye-Fi card or a
Flucard is used.
1 Select [Wireless Memory Card] in D3 menu and
press D.
The [Wireless Memory Card] screen appears.
2 Select [Action Mode].
Items that can be set are
displayed according to the type of
card inserted.
Eye-Fi card
Flucard
3 Specify [Auto Resize].
When set to T, JPEG images are saved to the Eye-Fi card
or Flucard with the size of r.
4 Press F twice.
u Caution
• Insert an Eye-Fi card or a Flucard in the SD2 slot. If it is
inserted in the SD1 slot, the wireless LAN function cannot be
used. When an Eye-Fi card or a Flucard is not inserted in the
SD2 slot, the [Wireless Memory Card] settings cannot be set.
• Set up a wireless LAN access point on a computer for the
card connection.
• For RAW images and movie files, the success of transfer
depends on the specifications and settings of the Eye-Fi card
in use. GPS log files cannot be transferred.
• Images may not be transferred when the battery level is low.
• It may take time to transfer a large number of images. The
camera may turn off if the internal temperature of the camera
becomes high.
• For precautions on the Eye-Fi card, refer to “About Eye-Fi
Cards” (p.108).
t Memo
• A smartphone can be used to operate the camera when a
Flucard compatible with this camera is used. Refer to the
Flucard manual for details on how to use the card.
• When an Eye-Fi card is used, 100 images can be stored in a
single folder. For RAW+ images, two files are counted as one
image.
• In Step 2, select [Communication Info] to check the wireless
LAN information, and [Firmware Info/Options] to check the
firmware version of the card.
• When [Reset Transfer Settings] is selected in Step 2, the
[Action Mode] setting is returned to the default value.
Using a Wireless Memory Card
D3
AUTO
Transfers automatically when images are
taken, new images are saved, or images are
overwritten.
For movies, only files of 2 GB or less can be
transferred.
SELECT
Transfers images or folders that are selected in
[Eye-Fi Image Transfer] of the playback mode.
Only JPEG and RAW images can be transferred.
OFF Stops the communication function.
ON Enables wireless data transfer with Flucard.
OFF Disables wireless data transfer with Flucard.
Cancel
Cancel
OK
OK
Action Mode
Action Mode
Auto R esize
Auto Resize
Commun icatio n Info
Communication Info
Firmwa re Inf o/Opti ons
Firmware Info/Options
Wireles s Memo ry Ca r d
Wireless Memory Card
Automa ticall y tran sfers
Automatically transfers
unsent image s from memo r y car d
unsent images from memory card