User Manual

54
Shooting Functions
3
5 Press E.
The camera returns to standby mode.
Memo
The settings for the white balance can be set in the E2 menu.
(w p.R40)
You can save up to three manual white balance settings.
1 Select o in Step 2 on p.53 and press B.
2 Select from o1 to o3.
3 Under the light you wish to measure the white
balance of, select a white area as the subject,
and press the shutter release button fully.
The captured image is displayed.
[The operation could not be completed correctly] appears when
measuring is unsuccessful. Press E to remeasure the white
balance.
4 Use ABCD to specify the measuring range.
5 Press E.
The White Balance setting screen reappears.
You can copy the white balance settings of an image captured
with this camera and save them as Manual White Balance.
1
In single image display of the playback mode, display
the image with the white balance settings you want to
copy and then press
B
.
The playback mode palette appears.
2 Select o (Save as Manual WB) and press E.
The save confirmation screen appears.
3 Select the “Manual” number 1,
2 or 3 to save the settings.
Use Q to select a different image.
4 Press E.
The white balance settings of the selected image is saved as
Manual White Balance and the camera switches to standby mode.
Caution
The fine-tuned white balance value used when shooting is not
saved.
Manual White Balance
Manual White Balance
Manual White Balance
Cancel
Cancel
Adjust
Adjust
WB
±
WB
±
OK
OK
Check
Check
Saving the White Balance Settings
of a Captured Image
Cancel
Cancel
OK
OK
Save as Manual 1
Save as Manual 1
Save as Manual 2
Save as Manual 2
Save as Manual 3
Save as Manual 3
Saves this image's White Balance
Saves this image's White Balance
settings as a cust om selection
settings as a custom selection
100-0001
100-0001
e_kb547_ENG.book Page 54 Thursday, May 15, 2014 9:35 AM